Welcome, Guest
Username: Password: Remember me

TOPIC: DXF Export of layers

DXF Export of layers 10 months 2 hours ago #5380

  • SandroM
  • SandroM's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Hi, I am using TurboCAD (an AutoCAD-like design software) for detailed drawings of elements of a project. Is it possible to export in DXF format only selected layers instead of the full DELFTship project?
The administrator has disabled public write access.

DXF Export of layers 9 months 3 weeks ago #5384

  • Maryak
  • Maryak's Avatar
  • OFFLINE
  • Gold Boarder
  • I was tired, today I am retired
  • Posts: 173
  • Thank you received: 25
  • Karma: 4
Yes, untick visible in the layers dialog.
The administrator has disabled public write access.

DXF Export of layers 9 months 3 weeks ago #5386

  • SandroM
  • SandroM's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Hi Maryak,

thank you for the quick reply. However, even with one layer (the hull) set to visible in DELFTship, I get the full set of layers exported to DXF.

Presently, the workaround I use is to copy the project to a new file and then manually delete the unwanted layers before exporting the remaining one(s) to DXF, but the process is long, quite cumbersome, and not really elegant...

I'll continue my quest...

Sandro
The administrator has disabled public write access.

DXF Export of layers 9 months 3 weeks ago #5387

  • surleau
  • surleau's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Karma: 0
Hello,
you are lucky.. I have only one layer. The file DXF for the lines plan is considered like corrupted by autocad. I don't arrived to open and to print.
Same I can't export my project, the export function is not activeted in the professionnal version I got.
who can help me ?
Cordialement
Fran├žois
The administrator has disabled public write access.

DXF Export of layers 9 months 3 weeks ago #5388

  • Maryak
  • Maryak's Avatar
  • OFFLINE
  • Gold Boarder
  • I was tired, today I am retired
  • Posts: 173
  • Thank you received: 25
  • Karma: 4
Sorry, I should have been more explicit. Turning off layers works when exporting to DXF mesh.
DXF 3d curves exports as edges, plus stations, buttocks and waterlines dependent on their selection in the main dialog.

Regards Maryak

PS I have often wondered why the free version removed the ability to export to IGS which was available in earlier versions.

From Delftship to CAD



Beagle.jpg




BeagleAll-Temp0000.jpeg
The administrator has disabled public write access.

DXF Export of layers 9 months 3 weeks ago #5390

  • iosif
  • iosif's Avatar
  • OFFLINE
  • Expert Boarder
  • Romanian citizen, designs & builds small boats
  • Posts: 114
  • Thank you received: 7
  • Karma: 1
Hi Fran├žois

Are you sure you activated your professional version?
If yes, write an email to DelftShip and ask for help.
I am sure you will get a prompt answer. :)

Best wishes
Iosif
The administrator has disabled public write access.

DXF Export of layers 9 months 3 weeks ago #5392

  • surleau
  • surleau's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Karma: 0
Thanks for your help. I will try when I will be back to my home.
Have a nice Christmas holiday if it is the case.
Cordialement
Francois
The administrator has disabled public write access.
Time to create page: 0.077 seconds
Powered by Kunena Forum