Welcome, Guest
Username: Password: Remember me

TOPIC: - Modeler wanted -

- Modeler wanted - 1 week 1 day ago #5301

  • Emilien
  • Emilien's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Hello there,

As reprensenting a small yard, we design most of our works in Rhino. I seek someone who could help to implement our hull model designed in Rhino into Delftship. IGES model or STL are available. Fees will be.
My questions:
-Is anyone of you who will be interrested in the job?
-Do you recommand anyone or any compagny where I should oriented myself to?

Thank you per advance,
Regards,
Emilien
The administrator has disabled public write access.

- Modeler wanted - 1 week 1 day ago #5302

  • joostvs
  • joostvs's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 1
  • Karma: 0
Did you try to import the IGES file ? Delftship allows you to do this. Alternatively, it allow you to import an STL file.

If you want me to test it, that is OK. But in that case, I need your IGES or STL file.

To my experience, Delftship is quite eay to use, but (as usual) it takes some time to get familiar with its capabilities.
The administrator has disabled public write access.

- Modeler wanted - 1 week 23 hours ago #5304

  • joostvs
  • joostvs's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 1
  • Karma: 0
I wonder if you received my reply of yesterday?
Delftship can import IGES and STL files. My offer was to test one of your cases and see the result from Delftship. Of course, I would need a file from you.
regards,
Joost
The administrator has disabled public write access.
The following user(s) said Thank You: Emilien

- Modeler wanted - 1 week 23 hours ago #5305

  • Emilien
  • Emilien's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Thank you Joost for your answer. (I only got the notice by mail of your last message...).
Anyway, yes I did import the files in IGES as well as STL. It result still with many points of leaks, while Rhino mention it as closed polysurface. I can send you the model. However we should contact by private message I assume.
Thank you.
Regards,
Emilien
The administrator has disabled public write access.

- Modeler wanted - 1 week 16 hours ago #5306

  • joostvs
  • joostvs's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 1
  • Karma: 0
Emilien,

I have tried to find a private message option but could not find it. So, ok, make your email adres known to me somehow.

Kind Regards,
joost
The administrator has disabled public write access.

- Modeler wanted - 5 days 23 hours ago #5307

  • joostvs
  • joostvs's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 1
  • Karma: 0
Emilien,
I have not seen a response from my last reply.
Not interested anymore ?
The administrator has disabled public write access.

- Modeler wanted - 5 days 13 hours ago #5308

  • Emilien
  • Emilien's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Hello Joost,

Sorry for the delay to answer. I am still interested of your help, please!
It took some time, because I tried to get delfship to give you my email in private.. No help so far from them.
I did create an intermediate one, (temporarily), please send me an email on this following adress : This email address is being protected from spambots. You need JavaScript enabled to view it.
We will continue further.
Hope to read you soon in there.
Thank you!
Cheers, Emilien
The administrator has disabled public write access.
Time to create page: 0.121 seconds
Powered by Kunena Forum