Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Nautical designer wanted

Nautical designer wanted 2 months 3 weeks ago #5235

  • DvR
  • DvR's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 9
  • Karma: 0
I am looking for someone ho wil and can make - for a small fee - the translation from sketch design to digital design. It wil be a mix between a MY/SY.

Kind regards DvR
The administrator has disabled public write access.

Nautical designer wanted 2 months 3 weeks ago #5236

  • Icare
  • Icare's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 119
  • Thank you received: 17
  • Karma: 5
Is it for for one model?
Can you scan the sketch and post the pictures?
How detailed the digital model must be?

I assume many of us will be glad to do the job... if it isn't a too work.

But, of course, the best would be you learn the software use... You'll never be better served but by yourself (as it's said in french).
The administrator has disabled public write access.
The following user(s) said Thank You: DvR

Nautical designer wanted 2 months 3 weeks ago #5237

  • DvR
  • DvR's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 9
  • Karma: 0
I would also like the program to learn, but there are still so many other things to do with this project. What I initially want is the lines and cross sections drawing so I can make a model of it.
I'll attach a picture of what i have in mind
Attachments:
The administrator has disabled public write access.

Nautical designer wanted 2 months 3 weeks ago #5239

  • Tubarao
  • Tubarao's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 8
  • Thank you received: 1
  • Karma: 0
Do you need the hull and super strtucture or just the hull?
The administrator has disabled public write access.

Nautical designer wanted 2 months 3 weeks ago #5240

  • DvR
  • DvR's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 9
  • Karma: 0
I need both, but if we can start with the hull ist also fine
The hull is more or less a copy off the Wider 150
The administrator has disabled public write access.

Nautical designer wanted 2 months 3 weeks ago #5247

  • Icare
  • Icare's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 119
  • Thank you received: 17
  • Karma: 5
Here I propose you a model.

I based it on your picture only.
I didn't drawn it at scale, so you'll have to resize it according to your project.
I drew the outter surface only and I didn't draw the motors: it's still a document made for discussion, not for building yet.
Attachments:
The administrator has disabled public write access.
The following user(s) said Thank You: DvR

Nautical designer wanted 2 months 2 weeks ago #5249

  • DvR
  • DvR's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 9
  • Karma: 0
Hello Icare,

Thank you very much for this design.
How can we make good agreements with each other about the sequel.
(I will also try to go through your tutorial)

Additional info fot the model:

Length overall: 50.000 (meters)
Waterline length
Beam: 10.550
Draft keel up 2.400
Draft Keel down 5.000
Scale size 1 : 50

To control the ship I will use Azipots, so a rudder is not necessary
I would like to have the possibility for a section (print) to each meter
How can we be directly connected fort the details?
The administrator has disabled public write access.

Nautical designer wanted 2 months 2 weeks ago #5250

  • Icare
  • Icare's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 119
  • Thank you received: 17
  • Karma: 5
I finally searched for what is a "Wider 150"... What a nice machine! B)
... and twice bigger than I imagined...

But it's pretty different than your drawing (just compare the stems (bow profiles)).
Will you make a replica as exact as possible or just a yacht loosely modelled on the Wider family?

It seems there are masts and booms on the picture you posted. Am I right? Do you wish to make a sailship?
If so, the rudder is required because the Azipods are efficient only when the thrust is on. No propulsion, no steering.

Concerning the sections drawing, there's no problem: Delfship can draw them using 4 different planes. The problem may happen when trying to print them using the right scale (I never printed any DS model). But it won't be insurmountable.
The administrator has disabled public write access.

Nautical designer wanted 2 months 2 weeks ago #5252

  • DvR
  • DvR's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 9
  • Karma: 0
What I like about the Wider 150 (and W-165) is the tender solutions and the beachclub
This, I would like to work out in detail, but in a own design.
It will be - as I mentioned in my first Delftschip Topic - a combination between a Motoryacht (MY) and a Sailingyacht. (SY)
Under sail i will make a rudder solution in the keel in de down position, and if necessary also the fixed keel.
For the sailing part I get my inspiration from for example SY like Perini Navi- Baracuda
The administrator has disabled public write access.

Nautical designer wanted 2 months 2 weeks ago #5254

  • Icare
  • Icare's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 119
  • Thank you received: 17
  • Karma: 5
If the rudder is attached to the keel and if the keel chord is as short as you drawn it, the rudder won't be really efficient due to its short moment arm (distance between the rudder and the center of gravity). That's why a drew one.

Will you make a beachclub with doors unfolding to be used as pontoons or will these doors remain fixed (open or closed, but unmoving)?

I prepared two pictures to show you what can be done about drawing sections.
Attachments:
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.120 seconds
Powered by Kunena Forum